Adhemax®NiLow – 用于塑料電鍍的無氨化學鎳
Ammonia-free electroless nickel process for plating on plastics
高濃度的氨氮是化學鎳廢水難于處理的重要原因🔱之一，氨氮超标排放會對魚類等水生生物造成毀滅性打擊，近年來國家對氨氮的排放限制愈發嚴格，中🌈國電鍍排放标準中對氨氮的排放上限已經降至 8 ppm。
High concentration of ammonia & nitrogen is very difficult to be treated in EN wastewater, and its excessive emission will cause devastating strikes to aquatic organisms. Therefore, the restriction on ammonia & nitrogen emission becomes much stricter worldwide in recent years. The upper limit of ammonia & nitrogen in Chinese Emission Standards for electro-plating has been reduced to 8 ppm.
氨氮作爲化學鎳的重要組分之一，具備絡合、穩定和緩沖🔴的作用，性能優異，幾乎無可取代。
“隻要做塑料電鍍，就難以繞開化學鎳；隻要用化學鎳，就難以回避氨氮問題。”
長久以來，這個矛盾都看似無法調和。
As one of the important components of electroless nickel, ammonia is almost irreplaceable with its ability of excellent complexing, stabilizing and buffering.
‘Electroless nickel could not be avoided when plating on plastics, while ammonia could not be avoided when using electroless nickel.’
This conflict seems inevitable for a long time.
Adhemax®NiLow無氨化學鎳工藝是安美特NiLow系列最新的研發成果，至今已🔞在全球多個國家實現工業化應用，在中國某家大型🐅汽車配件供應📐商實現量産，用于ABS和ABS/PC素材，其優良👈的穩定♌性和可靠性得到了客戶的認可。
Adhemax®NiLow is the latest improved version on basis of Atotech NiLow series and has been used in many countries worldwide. In China, Adhemax® NiLow has gone into mass production successfully in a large automotive supplier and its stability and reliability for ABS and ABS/PC was highly praised by customer.
安美特Adhemax®NiLow用于塑料的無氨化學鎳的主要特點如下：
1. 高穩定性，可以24小時連續生産；
2. 整個使用周期氨氮排放爲0；
3. 應用于ABS和ABS/PC素材；
4. 不含氨氮，不含鉛，不含硼酸；
5. 易于操作和控制，操作溫度30-40℃。
Atotech Adhemax®NiLow is an ammonia free electroless nickel for plating of plastics, the main features are as below:
1. High stability, suitable for continuously production.
2. Zero emission of ammonia & nitrogen.
3. Suitable for ABS and ABS/PC materials.
4. Free of ammonia & nitrogen, lead and boric acid.
5. Easy to operate and control, can be used at low temperature (30-40℃).
