高泰（Coatex）VISCOATEX 560丙烯酸增稠劑

VISCOATEX 560丙烯酸堿溶脹增稠劑

Viscoatex 560 是一支環保型丙烯酸堿溶脹增稠劑， 它不含甲醛， APEO，重金屬和🏃溶劑，适用于水性塗料，膠黏劑，密封膠等領域。Viscoatex 560 推薦添加量： 0.1%~1.5%（供㊙️應形💘式）。

産品規格
外觀： 奶白色液體
固含量（%）： 28
pH (20°C): 3.0~4.0

産品特點
VISCOATEX 560:
經濟型産品，性價比高産品易添加，可以後添加，使用方⭐便提供低剪切粘度，防沉降，防分水能賦予體系良好的粘度穩定性良🌐好的耐水性。

應用
VISCOATEX 560 對水相增稠爲主，假塑型強， 防分水，防沉降，防流挂效果佳。VISCOATEX 560 适用于中高 PVC 塗料，尤其适合用
于拉毛塗料及造型塗料， 定型效果突出。VISCOATEX 560 推薦在加🌂入乳🛀液⛷️後添加，分散均勻後注意調整最終的 pH 值在 8.5~9.0 之間。 氫氧化鈉溶液、 氨水或者有機胺等都可用作 pH 調節劑🧡。

貯存
Viscoatex 560 會因結冰而發生不可逆的改變。其儲存溫度應爲 5°C - 40°C，避免陽光直♍射，防止由氣候因素引起的品質下降。
打開包裝後，使用完畢應立即密封。在空氣中敞開，産品表🌂面會出現結皮。在上述條件下，産品應在交付後✍️ 6 個月内使用。
在容器的底部可能會出現輕微可見的分層或沉澱，這⛹🏻‍♀️是正常的，不會影響産品的性能及技術指标。如有必要，過濾後使用。

包裝
220L 塑料桶
1000L 噸箱

Typical Characteristics
Appearance Low viscous white milky liquid
pH 3.2
Solid Content (%) 28
Active content (%) 28
Solvent Water

Recommended addition level
0.1 - 1.5 % as supplied based on total formulation weight.

Standard Packaging
Other packaging may be available upon request
- 1000 L IBC
- 220 L Drum
- Bulk

Handling & Storage
It can be irreversibly altered by frost. It should be protected from the effects of weathering, stored between 5 and 40°C and protected from direct sun exposure. Once opened, packaging should be resealed immediately after use. In these conditions, this product should be used within 6 months from delivery.

Processing instructions
Supplied as a low viscosity liquid emulsion, VISCOATEX™ 560 is very easy to handle. No predissolution, elimination of lumps or warming is required. VISCOATEX™ 560 may be used either at the beginning of the formulation or in the pigment grinding or in the finished product to adjust the final viscosity. The pH of the formulated product must be controlled to obtain good performance and
reproducible viscosity. 

Health and environmental data
For safe handling please refer to the Safety Data Sheet. For more information about health and environmental data, please contact Coatex.

Applications
Adhesives and Sealants
- Assembly
- Other Adhesives
- Sealants
Coatings And Inks
- Architectural Coating
- Graphic Arts
- Industrial Coatings
- Textile And Leather Coating

Key Benefits
Formulation
•  Cost in use
•  Easy handling
•  Compatibility
•  Post addition
Storage
•  Syneresis resistance
•  Antisettling
•  Viscosity stability
•  In-can appearence
Application
•  Brushability
•  Rollability
•  Sag resistance
•  Sprayability
Film Properties
•  Gloss
•  Hiding power/Opacity
•  Rub out
•  Stain resistance
Other
•  APEO free
•  Bacteria resistance
•  Heavy metal free
•  Solvent-free

Thickening mechanism
Non Associative
Self Association
Associative
Viscosity contribution
Low Shear contribution
Mid Shear contribution
High Shear contribution
PVC
PVC Low
PVC Mid
PVC High